Fix Red Light Issue on WiFi Router

Fix Red Light Issue on WiFi Router

Routers have made everyone’s life smooth and easy by providing an unlimited internet connection throughout their home. The LEDs on Netgear router indicates different meanings. The LEDs are:

  • Power LED
  • Internet LED
  • WPS LED
  • Ethernet LED

If the LEDs on your WiFi router are displaying a solid green color, it means that your device is working smooth. However, if any of the LEDs turns red or amber from green, then it is a big thing to worry about.

Here, in this piece of writing, we will guide about how to fix red light issue on your WiFi router with ease. So, read on!

Tips to Fix WiFi Router Red Light Issue

Tip 1: Check the Connections

Your WiFi router may display red color LED if there is a fault in the cable connections you have made. To fix the issue, check all the cable connections made by you. In the event that you find any loose or improper Ethernet/ wired connection, get them fixed immediately. Besides, we suggest you check the Ethernet cable you have used. The cable must be free from any sort of dust and damages.

Once you are done, check the Ethernet connection by connecting any of your WiFi-enabled devices to the router and by accessing 192.168.1.1 IP on a computer, laptop or mobile device.

Tip 2: Check the Power

Well, your WiFi router may also flash red light is the power being supplied to it is inadequate. To do away the problem, we suggest you check the wall socket in which your WiFi router is plugged in. The wall plug must not be damaged or fluctuated.

Tip 3: Check the Placement

Your WiFi router may continue to display a red light color if it is placed near to

  • Thick or concrete walls
  • Fall ceilings or too closer to roof
  • Corners
  • Inside a cabinet
  • Interference-creating public or neighboring hotspot
  • Under a table
  • Behind curtains/ devices
  • Obstructions in your home like baby monitors, Bluetooth speakers, etc.

The best location for your WiFi router must be placed in center-most and higher location in your home and away from the list mentioned-above. Once you are done with relocating your router, check whether the red light issue is fixed now. Apart from that, check the router’s connectivity on your connected devices by accessing the 10.0.0.1 IP. 

Tip 4: Check the Distance

You will not be able to make the most out of your WiFi router if there is a big distance between your router and modem. So, to fix the annoying red light issue, make sure to place your router and modem in reach of each other.

Tip 5: Check the Firmware

You may also face red light issue on your WiFi router if the firmware on it is outdated. So, navigate to the official site of your device or log in to your router using 192.168.1.0 IP for firmware update on-screen instructions. If you find any latest updates available for your router, get it updated by following the on-screen instructions.

Tip 6: Check the Configuration

Bear in mind – if you haven’t configured your WiFi router in a proper manner, then also you may deal with red light issue. Thus, to fix it, make sure that your router is configured completely.

Tip 7: Check the Channel

Your WiFi router may display a red color if it is operating on a default or overloaded WiFi channel. Chances are that your neighbors WiFi devices are operating on the same channel as of your router, resulting in interference. So, log in to your router using 192.168.1.2 IP and change the default channel of your WiFi router by following the on-screen instructions.

If the issue remains the same, then chances are that your WiFi router is tired and needs some rest. For his, you have to unplug your router, wait for a few minutes, and then plug it back in again. The LED on your router will soon become stable after blinking green.

Our guide on how to fix red light issue on a WiFi router ends here. However, of the issue continues to trouble you, without much delay, drop your concerns into the comments section.

Pooja Saxena